Heat Shrinkable Cable End Cap
Application and features:
AEC heat shrink end cap is made from crosslinked polyolefin. Itoffers sealing the ends of power and control cable, and ensure waterproof. The internal surface of End cap has a layer spiral coated named hot-melt adhesive, which retains its flexible property after full recovery. It is universally applied to power distribution cable in the open air and underground.
Material Properties:
| Properties |
Test standard |
Typical data |
| Tensile Strength |
GB1040 |
¡Ý12.0Mpa |
| Elongation at break |
GB1040 |
¡Ý350.0% |
| Density |
GB1033 |
0.95¡Á103kg/m3 |
| Hardness |
GB2411 |
¡Ü80 |
| Accelerated Hot aging |
GB14049 |
7 days at 136¡æ |
| Tensile strength variation rate |
GB14049 |
¡Ü¡À20% |
| Elongation at break variation rate |
GB14049 |
¡Ü¡À20% |
| Flexibility under low-temperature |
GB5470 |
No crack |
| Volume resistance |
GB1410 |
¡Ý1.0¡Á1012¦¸.cm |
Such are typical data, are not as a criterion for products.
Specification for ARC-AEC Heat shrink End Cap
| Goods Code |
Specification |
As supplied |
After recovery |
Length As supplied |
Length As supplied |
Cross-section (mm2) |
| a(max) |
b(max) |
L(min) |
R(min) |
| AEC2000001 |
AEC-20 |
20 |
8 |
75 |
66 |
|
| AEC4000002 |
AEC-40 |
40 |
15 |
95 |
83 |
|
| AEC5500003 |
AEC-55 |
55 |
25 |
115 |
103 |
|
| AEC7500004 |
AEC-75 |
75 |
30 |
140 |
120 |
|
| AEC1000005 |
AEC-100 |
100 |
45 |
145 |
120 |
|
| AEC1400006 |
AEC-140 |
140 |
70 |
175 |
150 |
|
a=I.D. as supplied
b =I.D. after recover
|
